Copper Clad Boards & PCB Manufacturing etc available from JAB Electronic Components

Copper Clad Board

High quality 1oz copper clad boards in epoxy glass material. Thickness 1.6mm Suitable etchant is Ferric Chloride

JAB Order Code Size Single or
Double Side
Price Each 10-for
PCCS-01 PCB Material 100 x 160mm Single 1.40 12.60
PCCS-02 PCB Material 
76 x 330mm
Single 2.15 nfr
PCCS-03 PCB Material
76 x 164mm
Single 1.10 nfr
PCCD-01 PCB Material 100 x 160mm Double 1.50 13.50

Back to Catalogue Index

Back to home page

 

Please ask about Photo resist coated pcb.

 

Copper Clad Board Economy 

 1oz copper clad boards in paper bonded material. 
Thickness 1.6mm Suitable etchant is Ferric Chloride

JAB Order Code Size Single or
Double Side
Price Each 10-for
PCES-02 PCB Material 100 x 209mm Single ALL SOLD SORRY
PCES-01 PCB Material 100 x 160mm Single 0.80 7.70

 

Etch Resist Pen

A nylon tipped etch resist pen for direct use on copper clad board in the fabrication of PCBs. The ink adheres to the copper and is completely resistance to ferric chloride

JAB Order Code Size Price Each 10-for
PCEP-01 Etch Resist Pen Std 2.00 18.00

Back to Catalogue Index

Back to home page

 

PCB Tongs

Polystyrene tongs for handling PCBs in etching and cleaning processed using ferric chloride or sodium hydroxide solutions. The thin spatula style tips slide effectively under the board for easy handling.

JAB Order Code Type Price Each 10-for
PCVT-03 PCB Tongs 9.60 wsl
PCVT-05 Klickstic Tongs 0.90 6

Back to Catalogue Index

Back to home page

 

Etchant (Ferric Chloride)

A pack of ferric chloride (FeCl3) crystals for etching copper clad boards. Dissolve the crystals in approximately 1 pint of cold water. Note when using any chemicals such as ferric chloride wear protective gloves, clothing and safety goggles also us in a suitable area away from food. If used with care these chemicals are safe. Avoid contact with the skin.

JAB Order Code Type Price Each 
PCCH-01 Etching Crystals ASK

Back to Catalogue Index

Back to home page

 

Proto-bloc

Protobloc is a prototyping system offering a fast and economical method for circuit construction and development. The system is completely solder-less in concept thus allowing components be used time & time again.
Components are plugged into the board and are retained by double leaf spring contacts. By spacing sockets on a 2.54mm matrix all dual-in-line intregated circuits, plus many other components such as resistors, capacitors switches LEDs can simply be plugged into the board. An ideal system for teaching of electronic systems and circuit design.
Protobloc 1:- has a total of 400 tie points consisting of 5 interconnected contact sockets plus 4 rows of 25 interconnected sockets running alongside. Suitable for use as power rails. All contact positions are clearly defined on an alphanumeric grid.

JAB Order Code Type Price Each  10-for
PCPB-01 Protobloc-1 4.50 36.00
PCPB-02 Protobloc-2 (840 Tie Points) 6.30 nfr
PCPB-03 Protobloc-2 (1660 Tie Points) 14.90 nfr
PCPB-JU10 140 Piece Jumper Wire Pack 3.90 ask

Back to Catalogue Index

Back to home page

 

PCB Offcuts

Subject to availability we have a pack of copper clad PCB. This is a random selection of varying sizes and types (as available). In total each pack contains approximately 1sq foot (300 sq mm) Due to weight v postal costs we do not ship this product out of the uk.

JAB Order Code Type Price Each 
PCB-OFF PCB Off cut pack approx 1sq foot 4.30

Back to Catalogue Index

Back to home page

 

PCB Drills

This popular pack of turbo (stepped) shank drills. Ideal for PCB. These are a random selection of solid tungsten miniature drills. Best suited to very high speed drilling using a drill stand. Most sizes are around 1mm in diameter each pack contains 5 drills in total.

JAB Order Code Type Price Each 
PCVT-04 Random Drill Pack ALL SOLD AT THIS TIME SORRY
PCVT-06 Set contains 1 each:- 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.2mm 10.90  wsl

Back to Catalogue Index

Back to home page

23.01.09/01.05.10/07.04.14